 |
Shop
30.000 sq feet in main shop, with two 15 ton in one and 5 ton
|
 |
CO2 Removal
Skid mounted membrane system for CO2 gas removal from waste gas created in a landfill. Methane and other gases are then pipe to a processing center. |
 |
North Texas
Skid package for nitrogen removal from natural gas. System is designed for mobility as part of an exploration unit and testing of potential wells in the USA |
 |
Qatar
A gas separation unit (GSU) to enhance the vent recovery system in a LLPDE plant. The GSU is dedicated to treat Hydrocarbons and Nitrogen to produce a high purity rich stream. |
 |
China
Propolyene Recovery Unit for petrochemical plant in China. All vessels and heat exchangers are China stamped. System is fitted with additional separator for recapturing hydrogen and membrane separator for nitrogen recovery. |
 |
China
Iso-Butane and Nitrogen Recovery unit for petrochemical plant in China. All vessels and heat exchangers are China stamped. Packaged as a double decked unit, special detail was given to structure of unit due to being located in a seismic area and the unit will sit on top of another skid. |
 |
Saudi
Isobutene and Nitrogen Recovery Unit for Saudi chemical plant. System is triple decked and connected to Reboiler unit. Instrumentation is foundation field bus protocol with complete check out performed by Glex personal. |
 |
USA
Accumulator lube oil system for a USA Refinery. The Accumulator provides a back-up oil supply for plant compressor. |
 |
Alaska
Sulfur recover unit for USA plant in Alaska. Complete unit contains waste heat boiler, storage tank, reactor, and knock out drum. |
 |
Alaska
Sulfur recovery unit: Main module with control cabinet (70 ton)
|
 |
Alaska
Sulfure recovery unit: Upper module
|
 |
Colombia
Aqueous Ammonia Flow Control Unit for NOx control system at power plant in Colombia. |
|
California
Aqueous Ammonia Vaporizer Unit for NOx control system at USA power plant. A scaled down version of Glex standard that still features redundant heaters, blowers, and injection nozzles. Instrumentation is Foundation Field Bus protocol. Two units were shipped to California, USA. |
 |
Illinois
Aqueous Ammonia Vaporizer Unit for NOx control system at US Refinery. Unit contains four heaters rated at 480KW each with A/C control panels, two 100HP blowers with inlet filter silencers and redundant ammonia filters and atomization nozzles. Designed for classified area. |
 |
Qatar
Aqueous Ammonia Vaporization Unit for NOx control system at refinery in Qatar. Features two skid units. Ammonia Storage Day tank with workers platform that also allows inspection of vaporizer, spray nozzles, and instruments. All electronic components are ATEX certified for hazardous area. This includes variable stroke pump, 240 KW heater at 690V and instrumentation. All instrumentation is based on the foundation field bus protocol. |
 |
Delaware
Aqueous Ammonia vaporizer unit with forwarding pump skid for expansion of a USA refinery’s NOx control system. Unit underwent critical redesign to fit in space half of the original design requirement. Unit still maintains redundancy of 240KW heaters, high pressure blowers, and air atomization nozzles. |
 |
California
Two Aqueous Ammonia vaporizer skids for retrofit of US chemical plant NOx control system. Each skid has two low watt density heaters, two blowers with inlet filter silencers and two atomization nozzles. All instruments are Hart smart with complete install and check out by Glex. |
 |
Louisiana
Aqueous Ammonia Flow control unit and vaporizer for USA Hydrogen Plant NOx control system. One of Glex’s standard designs featuring redundant heaters, blowers, and injection nozzles. System allows for maintenance to be performed without shutting unit down. Operators have full remote control and monitoring ability of critical functions. |
 |
Texas
32,000lb Anhydrous Ammonia Storage tank and Vaporizer skid for expansion of USA Chemical Plant. The unit delivers ammonia for NOx emissions control. The Vaporizer skid is powered by low watt density heaters. System designed to give operators full remote monitoring and easy access to perform inspections. |
 |
Florida
A combined package of Anhydrous Ammonia storage tank, Ammonia Flow Control Unit, and Unloading skid designed for NOx emission control at a USA Power Plant. The Ammonia storage tank has 65000lbs flooded capacity and feeds ammonia directly to the AFCU. Low watt density heaters maintain pressure in the tank. High pressure blowers (1 standby) deliver air and injected vapor ammonia to Glex designed static mixer. |
 |
Single Cycle Ammonia Vaporization and air blower skids. (Eight identical units)
Systems for single cycle plants, which included high capacity, quench air blowers to offset high temps from flue gas (eight systems total). Because of limited space in the field, Glex Inc. designed the systems as a double-decked unit. The lower section contained the quench air blowers with the corresponding VFD’s. The upper section contained the aqueous ammonia dilution and vaporization skid, as well as the injection manifold. The units were shipped to California in two sections. |
 |
Hot Flue gas Recirculation
Ammonia Vaporization Control unit unitizing hot flue gas recirculation for NOx control at South American power plant. Unit has additional heater to increase outlet temperature due to sulfur content of the gas. High temperature pressure blowers, their associated VFD, heater control panels, and instrumentation are all rated for classified area. |
.
About
